Main Functions - Omron E5CN-HT User Manual

I/O Configuration and Main Functions
Model Number Structure
Model Number Legends
1-2-2

Main Functions

Input Sensor Types
Controllers
E5AN/E5EN-@@@@@@@@M@-500
1 2 3 4 5 6 7 8 9
1. Type
H: Advanced
T: Programmable type
2. Control Mode
Blank: Standard or heating/cooling control
P: Position-proportional control
3. Control Output 1
A: Control Output Unit
R: Relay output
4. Control Output 2
A: Control Output Unit
R: Relay output
5. Auxiliary Outputs
2: Two outputs
3: Three outputs
6. Option 1
Blank: None
H: Heater burnout/Heater short/
Heater overcurrent detection (CT1)
HH: Heater burnout/Heater short/
Heater overcurrent detection (CT2)
7. Option 2
B: Two event inputs
BF: Event input + Transfer output
8. Option 3
M: Option Unit can be mounted.
9. Power Supply Voltage
Blank: 100 to 240 VAC
D: 24 VAC/VDC
10. Terminal Cover
-500: With Terminal Cover
This section introduces the main E5@N-HT functions. For details on particular
functions and how to use them, refer to SECTION 3 Basic Operation and fol-
lowing sections.
• The following input sensors can be connected.:
Thermocouple:
Platinum resistance thermometer: Pt100, JPt100
Current input:
Voltage input:
Option Units
E53-@
10 1
1. Function
EN01: RS-232C
communications
EN02: RS-422
communications
EN03: RS-485
communications
AKB: Event input
Output Units
E53-@@
1 2
1. Control Output
R: Relay output
Q: Voltage output
(for driving SSR)
Q3: Voltage output
(for driving SSR) +
24 VDC (NPN)
Q4: Voltage output
(for driving SSR) +
24 VDC (PNP)
C3: Current output +
4 to 20 mA DC
C3D: Current output +
0 to 20 mA DC
V34: Linear voltage output +
0 to 10 VDC
V35: Linear voltage output +
0 to 5 VDC
2. Version
Blank: Available for
E5AN-HT/E5EN-HT
and E5AK/E5EK.
N: Available only for
E5AN-HT/E5EN-HT.
K, J, T, E, L, U, N, R, S, B, W, PLII
4 to 20 mA DC, 0 to 20 mA DC
1 to 5 VDC, 0 to 5 V DC, 0 to 10 V DC
Section 1-2
9