Chapter 2: Overview; Overview; 9600 Series Ip Deskphones; New In This Release - Avaya 9608 Installing And Maintaining

Chapter 2: Overview

Overview

9600 Series IP Deskphones

The Avaya 9600 Series IP Deskphones product line uses Internet Protocol (IP) technology with
Ethernet interfaces.
The 9600 Series IP Deskphones support DHCP and HTTP/HTTPS over IPv4/IPv6 including
Internet Control Message Protocol (ICMP) and Internet Group Management Protocol (IGMP). Both
the protocols enhance deskphone administration and servicing respectively.
These deskphones use DHCP to obtain dynamic IP addresses. The deskphones use HTTP to
download firmware files and HTTP/HTTPS to download configuration files.
With all 9600 Series IP Deskphones, you need only one Ethernet connection from the enterprise
switch to connect both deskphone and personal computer. You can connect your personal
computer and deskphone using an Ethernet cable.
The following information pertains to Australian law:
This equipment must be installed and maintained by trained service personnel. All input/output
ports are classified as Safety Extra Low Voltage (SELV, in the meaning of IEC 60950). To maintain
safety compliance when connecting the equipment electrically to other equipment, the
interconnecting circuits shall be selected to provide continued conformance of clause 2.3 for SELV
circuits (generally, double/reinforced insulation to 240 Vac rms to any primary/mains circuitry and
120 Vac rms to any telecommunications network circuitry). To ensure that these conditions are
adhered to, interconnect the equipment only with the already approved/certified equipment.

New in this release

General enhancements
• Supports user settings for volume on reboot and login.
Security enhancements
• Supports the use of TLS in conjunction with TTS (Time To Service).
• Supports H.323 signaling over TLS.
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323
Comments on this document? infodev@avaya.com
12