Replacing The Rtm Isdn 1500 - Polycom RMX 1500 Hardware Manual

Polycom RMX 1500 Hardware Guide

Replacing the RTM ISDN 1500

Update your license. For more information see, RMX 1500/2000/
a
Getting Started Guide, Chapter 2, "Procedure 2: Product Registration"
on page 2-23.
In the ISDN/PSTN Network Services define a New ISDN Network
b
Service. For more information see, RMX 1500/2000/4000
Administrator's Guide, Chapter 14, "Adding/Modifying ISDN/PSTN
Network Services" on page 14-49.
To replace the RTM ISDN:
Ensure that the power switch on the RMX 1500 is turned OFF (O).
1
Remove the PRI cables.
2
Loosen the captive screws that fasten the card to the MCU.
3
Remove the RTM ISDN card and pull the RTM ISDN card out of its
4
slot in the backplane.
Carefully slide the RTM ISDN card out through the rear panel.
5
Slide in the replacement RTM ISDN card into it's slot.
6