Installing The Rmx 1500; Unpacking The Rmx 1500 - Polycom RMX 1500 Hardware Manual

Chapter 1-Hardware Description

Installing the RMX 1500

1-8
The following procedures have to be performed to install the RMX 1500 in
your site:
•

Unpacking the RMX 1500

• Installing the RMX in a rack or as a standalone
• Connecting the RMX 1500 to the power source
• Connecting the network (LAN, IP and ISDN) cables to the RMX.
Unpacking the RMX 1500
To unpack and lift the RMX 1500:
When you receive the RMX 1500 packing case, inspect the equipment
1
for damage and verify that the components match the packing slip.
Open the top cover of the packing case.
2
Two boxes are placed on the top Stratocell®, labelled:
— Installation Accessories. This kit contains the power cables and a
USB key.
— Rack Installation Accessories. This kit contains the accessories for
the 19"/23" racks as follows:
Write down the RMX's serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Table 1-5 19" & 23" Rack Installation Accessories Package
Item ID
MEC2791A-L0
Description
Chassis runners (60cm in length)
suitable for installation within 60cm of
inter spaces (front-to-rear stands).
The chassis runners are required
when mounting the RMX 1500 on
19"/23" racks.
Quantity
2