Axis A1001 User Manual page 9

AXIS A1001 Network Door Controller & AXIS Entry Manager
Hardware Overview
Power & Relay Connector
6-pin terminal block for connecting power and the door controller's relay to external devices such as locks and sensors.
Buttons and Other Hardware
Tampering Alarm Pin Header
Two 2-pin headers for disconnecting the front and back tampering alarms.
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 41.
• Connecting to an AXIS Video Hosting System service. See page 35. To connect, press and hold the button for about 1
second until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 36. To connect, press and hold the button for about 3 seconds.
9