Axis A1001 User Manual page 23

AXIS A1001 Network Door Controller & AXIS Entry Manager
Access Management
• Card number (required if no PIN or card raw) – Enter the card number. See the card manufacturer's information about
where to locate the card number. The card number can also be retrieved by the system. Swipe the card on a connected
reader, select the reader in the list, and click Retrieve.
• Card raw (required if no PIN or card number) – Enter the card raw data, which can be retrieved by the system. Swipe
the card on a connected reader, select the reader in the list, and click Retrieve. Only use this identification type if a
card number cannot be located.
Note
To be able to save the profile, you must enter the user's First name or Last name and either the PIN, Card number, or
Card raw data.
Import Users
Users can be added to the system by importing a text file in comma-separated value (CSV) format. It is recommended to import
users when you need to add many users at a time.
Before you can import users, you must create and save a text (*.txt) file in the correct CSV format. Separate values by commas, no
spaces, and separate each user with a line break.
Example
virginia,potter,1212,56781234
jane,doe,1234,12345678
leia,garfunkel,8545,45673258
ororo,wolf,3548,78542654
john,doe,5435,87654321
To import users:
1. Go to Setup > Import Users.
2. Locate and select the *.txt file that holds the list of users.
3. Select the correct content type heading for each credential column.
4. To import the users to the system, click Import users.
5. Verify that each column contains the correct type of credential.
6. If the columns are correct, click Start importing users. If the columns are incorrect, click Cancel and start over.
7. When the import is finished, click OK.
The available content type headings, or credentials, are:
• First name
• Last name
• PIN code
• Card number
• Unassigned – Values that will not be imported. Select this content type heading to skip a particular column.
For more information about credentials, see Users.
Export Users
The Export page shows a comma-separated value (CSV) list of all the users in the system. The list can be used to import the
users to another system.
To export the user list:
23