AXIS A1001 Network Door Controller & AXIS Entry Manager
System Configuration
Maintenance Instructions
To keep the access control system running smoothly, Axis recommends regular maintenance of the access control system, including
door controllers and connected devices.
Do maintenance at least once a year. The suggested maintenance procedure includes, but is not limited to, the following steps:
•
Make sure all the connections between the door controller and the external devices are secure.
•
Verify all the hardware connections. See Verification Controls, on page 13.
•
Verify that the system, including the connected external devices, functions correctly.
-
Swipe a card and test the readers, doors, and locks.
-
If the system includes REX devices, sensors or other devices, test them as well.
-
If activated, test the tampering alarms.
If the results from any of the steps above indicate faults or unexpected behavior:
-
Test the signals of the wires using appropriate equipment and check if the wires or cables are damaged
in any way.
-
Replace all damaged or faulty cables and wires.
Once the cables and wires have been replaced, verify all the hardware connections again. See Verification
-
Controls, on page 13.
•
Make sure all access schedules, doors, groups, and users are up to date.
If the door controller is not behaving as expected, see Troubleshooting, on page 42 and Maintenance, on page 39 for
•
more information.
16