Reader Feedback - Axis A1001 User Manual

AXIS A1001 Network Door Controller & AXIS Entry Manager
Alarm and Event Configuration
Recipients
Recipients receive notification messages. The following recipients are available:
• HTTP
• HTTPS
• Email
• TCP
To add a recipient:
1. Go to Setup > Additional Controller Configuration > Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Schedules
Schedules can be used as action rule triggers or as additional conditions. Use one of the predefined schedules or create a new
schedule as described below.
To create a new schedule:
1. Go to Setup > Additional Controller Configuration > Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click OK.
To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.
Recurrences
Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour.
To set up a recurrence:
1. Go to Setup > Additonal Controller Configuration > Events > Recurrences and click Add.
2. Enter a descriptive name and recurrence pattern.
3. Click OK.
To use the recurrence in an action rule, first select Time from the Trigger drop-down list in the Action Rule Setup page and then
select the recurrence from the second drop-down list.
To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.

Reader Feedback

Readers use LEDs and beepers to send feedback messages to the user (the person accessing or trying to access the door). The door
controller can trigger a number of feedback messages, some of which are preconfigured in the door controller and supported by
most readers.
30