Alarm And Event Configuration; Configure Event And Alarm Logs - Axis A1001 User Manual

AXIS A1001 Network Door Controller & AXIS Entry Manager

Alarm and Event Configuration

Alarm and Event Configuration
Events that occur in the system, for example when a user swipes a card or a REX device is activated, are logged in the event log.
Logged events can be configured to trigger alarms and such alarms are logged in the alarm log.

Configure Event and Alarm Logs

The Configure Event and Alarm Logs page allows you to define which events shall be logged and trigger alarms.
View and configure the event log. See Event Log, on page 26.
•
• View and configure the alarm log. See Alarm Log, on page 26.
Event logger alarms can also be configured to trigger actions such as email notifications. For more information, see Setting Up
an Action Rule, on page 29.
Event Log
To view the logged events, go to Event Log.
To expand an item in the event log and view the event details, click
To filter the list of events by type, select the event in the Filter by topics list.
To filter the list by time, under Filter by date and time, select Based on date and time interval and enter the desired time interval.
To refresh the list, click Refresh list.
To define which events shall be included in the event log, go to Setup > Configure Event and Alarm Logs. The available options for
logging events are:
No logging – Disable event logging. The event will not be registered or included in the event log.
•
Log for all controllers – Enable event logging in all door controllers. The event will be registered for all controllers and
•
included in the event log.
Log for selected controllers – Enable event logging in selected door controllers. The event will be registered for all selected
•
controllers and included in the event log. Select this option for events that will be combined with either the alarm log
option No alarms or Log alarm for selected controllers.
In the Configure event logging list, click Select controllers under the event log item you want to enable. The Device
Specific Event Logging dialog opens. Under Log event, select the controllers that shall have alarm logging enabled
and click Save.
Alarm Log
To view the triggered alarms, go to Alarm log.
To expand an item in the alarm log and view the alarm details, for example door identity and state, click
To remove an alarm from the list after verifying the cause of the alarm, click Acknowledge.
To define which events should trigger an alarm, go to Setup > Configure Event and Alarm Logs. The available options for
triggering and logging alarms are:
• No alarms – Disable alarm logging. The event will not trigger any alarms or be included in the alarm log.
• Log alarm for all controllers – Enable alarm logging in all door controllers. The event will trigger an alarm and be
included in the alarm log.
.
26
.