Installation Instructions; Clearances; Installation - Cannon CANT User Instructions

Installation Instructions

Clearances

Installation

10
1. This appliance is to be installed by a licensed service person
only.
2. This appliance is to be installed in accordance with the
manufacturer's installation instructions, AS 5601/AG601,
Municipal Building Codes, Electrical Wiring Regulations and
any other statutory regulations.
3. Ensure the minimum clearances to combustible construction are
maintained during installation, including adequate space for
the proper operation and servicing of the heater.
For clearances to curtains and furnishing refer to warning 3 on
page 4
For minimum clearances refer fig 9 and 10.
9
4. Remove the carton from the heater and lift from pallet. Check
the heater is suitable for gas available.
(Please dispose of packaging appropriately, keep away from
children).
5. Prepare electrical and gas connections, a 10 Amp wall socket
needs to be located within 1.5m of the heater.
6. Fit rear spacers as per figure 10.
7. Place heater in position. (Check flue and gas connection posi-
tions. Refer to gas connection instructions on page 11 and flue
installation instructions on pages 14 & 15 and 16 & 17).
8. Remove the pedestal front by unscrewing two screws either
side. Refer figure 11.
Remove the heater front securing screws, one either side. Refer
figure 12.
10