Resetting To Factory Defaults - Zektor CVS4 User Manual

Step 1: Reset All Parameters to Factory Defaults
1
1
Start by pressing and
holding the Power
button...
3
 CVS4 Component Video Switch
2 3 4
2
...while continuing to hold the Power
button, press and hold both the '2'
and the '' buttons.
After about 4 seconds, the display will flash
indicating all parameters have been restored
to their factory programmed values.

Resetting to Factory Defaults

I f, for whatever reason, you'd like to reset your C VS4 back to its fac -
tor y condition, this is easily done...
Step 1: Reset All Parameters to Factory Defaults
1. First press and hold the Power button
2. While continuing to hold the Power Button, press and hold
both the '2' and '' buttons.
3. Af ter holding all buttons for about '4' seconds, the display
will flash indicating all parameters have been restored to
their fac tor y programmed values.
CVS4 Component Video Switch