Figure 4-1 Launching The Web-Client From Ip Utility - Honeywell HD4 EQUIP Series User Manual

Document 800-05620 Rev C
04/10
2. From the User Name drop-down list, select Administrator or Guest.
See Table 4-1 on page 46
3. In the Password field, enter the case-sensitive password. Only one user, an
Administrator or a Guest, can be logged on at a time.
• The default Administrator password is 1234.
• The default Guest password is guest.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
-OR-
Select the device and click Connect
The network settings for the connected device display in the System pane.
6. Click Launch Browser.
Figure 4-1 Launching the Web-Client from IP Utility
The Web-Client log on page opens. (See
Note Screen shots for the HD4MDIP/X model are shown in this document.
HD4 EQUIP Series IP Dome Cameras User Guide
for user roles and privileges.
.
Connect to the device then click
Launch Browser
Figure 4-2.)
47