Step 1: Confirm Your System Requirements; Table 3-1 User Profiles For Honeywell Ip Utility And The Web-Client - Honeywell HD4 EQUIP Series User Manual

Interface Administrator
Honeywell IP • View the list of available network devices
Utility and connect to the devices.
• Configure the IP network settings.
• Upgrade firmware.
• Change the access passwords for the IP
Utility application.
• Change the access passwords for the
Web-Client application.
Web-Client • View video and network settings.
• Configure compression settings.
• Configure camera setup.
• Configure video analytics.
• Configure audio and alarm setting ss.

Step 1: Confirm Your System Requirements

Document 800-05620 Rev C
04/10
Table 3-1 User Profiles for Honeywell IP Utility and the Web-Client
Note Windows administrator privileges are required to install the Honeywell IP
Utility and associated software.
Note Contact the network administrator if there are any questions regarding the
local area network (LAN) or any other network-related issues.
Install the Honeywell IP Utility on a work station with the minimum requirements (outlined
in Table 3-2). After the IP Utility is installed, the same computer workstation can be used to
access the Web-Client.
HD4 EQUIP Series IP Dome Cameras User Guide
Guest
• View the list of devices available on the
network.
• View system settings including device
name, IP address, and MAC address.
• Guest users are limited to the Live View
tab, where they can choose to view
video from the primary or secondary
streams.
33