Upgrading The Firmware; Launching The Web-Client Application; Figure 3-6 Ip Utility Firmware Upgrade - Honeywell HD4DIP Reference Manual

Configuring Network Settings

Upgrading the Firmware

Launching the Web-Client Application

40
Upgrading the Firmware on an HD4DIP Device
1. Check www.honeywellvideo.com/support/downloads/downloads_cam.html
your camera in the list. Click the firmware link to download the file.
2. In the Discovery pane, select the device to upgrade and click
Figure 3-6 IP Utility Firmware Upgrade
3. Click Upgrade Firmware. Follow the upgrade wizard steps to complete the upgrade.
4. Click OK. After the firmware upgrade, the device reboots. The device is rebooted. It
takes about 3 minutes to complete the upgrade process.
Note When you upgrade the firmware, the system reboots and temporarily loses
connection with the camera and stops operation.
You can open individual Web-Client applications for each discovered device from the IP
Utility. To launch the HD4DIP Web-Client application:
1. From the Discovery pane, select the device you want to launch, and click
2. From the System tab, click Launch Browser. The Web-Client application of the
selected HD4DIP(X) opens in Internet Explorer.
Note To enable or disable the HTTP server, select or clear the Enable HTTP
Server check box. By default, the option is enabled.
3. Select the user name and enter the password to log on to the application.
and find
.
.