Appendix B Specifications - Honeywell HD4 EQUIP Series User Manual

Ip dome camera
Hide thumbs Also See for HD4 EQUIP Series:
Table of Contents

Advertisement

Specifications
Document 800-05620 Rev C
04/10
Note
These specifications refer to all models, except where otherwise noted.
Specifications are subject to change without notice.
Video Signal Specifications
Video Standard:
Scanning System:
Image Sensor:
Number of Pixels (H x V)
Minimum Illumination:
(DSS on)
Video Output (local):
S/N Ratio:
Auto Gain Control (AGC):
Auto Electronic Shutter (ELC):
Automatic Lens Iris Control:
White Balance (AWB):
Lens Type:
Audio Signal Specifications
Audio/Two-Way
Electrical Specifications
Input Voltage:
Input Voltage Range:
Surge Suppression
Power Consumption:
Mechanical
Dimensions (WxH):
Weight:
Construction:
NTSC
High Res
Progressive
1/4" CMOS
1280 x 720 (HD); 640 x 480 (VGA)
0.25 lux color/0.22 lux for BW @ 50 IRE, F1.6
0.11 lux color/0.09 lux for BW @ 30 IRE, F1.6
1.0 Vp-p @ 75 Ohms
50 dB or more (AGC Off)
Off/On, selectable (10 – 40 dB)
1/60–1/100,000 sec
DC Iris level 1 – 25
AWC, AWC Push, Manual
True Day/Night (TDN)
3.3 mm to 12.0 mm Vari-focal Auto Iris, F1.6
Line in/out
24 VAC, PoE IEEE 802.3 af, Class 1
17–28 VAC
1.5 kW transient
3.5 W (max)
See diagram
(Figure
3.0 lb (1.3 Kg) camera only
Housing: Die cast aluminum
Finish: Light gray powder coating
Dome: Polycarbonate
B
PAL
1/50–1/100,000 sec
B-1)
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd4dipHd4dipxHd4mdipHd4mdipx

Table of Contents