User Profiles; Logging On And Off The Ip Web-Client; Launching The Web-Client From Ip Utility; Table 4-1 User Roles And Privileges - Honeywell HD4 EQUIP Series User Manual

IP Camera Web-Client

User Profiles

Logging On and Off the IP Web-Client

Launching the Web-Client from IP Utility

46
Table 4-1 describes the roles and privileges for the Web-Client application users:
Table 4-1 User Roles and Privileges
User Role
Administrator
Guest Operator
Note Only one user, an Administrator or a Guest, can be logged on at a time.
There are two ways to open each IP Web-Client.
• By clicking Launch Browser from the IP Utility interface.
• By entering the URL (the IP address) in the address bar directly from Internet
Explorer.
Note The web page where you log on to the Honeywell IP Utility and any IP device
web page (for example, the IP Web-Client) look very similar. You can tell the
difference between the two sites by the IP address in the web browser as well
as the program name in the lower left corner of the window.
1. From the desktop, double-click the Honeywell IP Utility icon
-OR-

Click Start All Programs

Utility Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
Privileges
• View video and network settings
• Configure the alarm and audio settings
• Set up the video compression settings
• Configure auto exposure and white balance for
the camera
• Set up camera sabotage and video motion
detection settings
• View video

Honeywell Video Systems
.
 
EQUIP Series IP