Manufacturer's Declaration Of Conformance; North America; Europe; Warranty And Service - Honeywell HD4 EQUIP Series User Manual

Manufacturer's Declaration of Conformance

North America

Europe

Warranty and Service

Document 800-05620 Rev C
04/10
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No.
60950-1.
The manufacturer declares that the equipment supplied with this guide is compliant with
the essential protection requirements of the EMC directive 2004/108/EC and the Low
Voltage Directive LVD 2006/95/EC, conforming to the requirements of standards EN
55022 for emissions, EN 50130-4 for immunity, and EN 60950 for Electrical Equipment
safety.
WARNING! This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
products returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer
Service at 1.800.796.CCTV for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.
HD4 EQUIP Series IP Dome Cameras User Guide
13