Launching The Web-Client From Ip Utility; Figure 4-1 Launching The Hd3Mdip/X Web-Client From Ip Utility - Honeywell EQUIP HD3MDIP User Manual

Launching the Web-Client from IP Utility

Document 800-04132V1 Rev A
01/10
1. From the desktop, double-click the Honeywell IP Utility icon
-OR-
Click Start All Programs
Utility Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
2. From the User Name drop-down list, select Administrator or Guest.
See Table 4-1 on page 44
3. In the Password field, enter the case-sensitive password.
• The default Administrator password is 1234.
Only one Administrator can be logged in at a time.
• The default Guest password is guest.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
-OR-
Select the device and click Connect
The network settings for the connected device are displayed in the System pane.
6. Click Launch Browser (see
page.
Figure 4-1 Launching the HD3MDIP/X Web-Client from IP Utility
HD3MDIP/X Network Camera Reference Guide
Honeywell Video Systems
for User roles and privileges.
.
Figure 4-1) to go to the HD3MDIP/X Web-Client logon
Connect to the device then click
Launch Browser
.
EQUIP Series IP
45