Statistics: Received Bit Rate And Frame Rate; Figure 4-10 Video Codec Settings - Honeywell HD4 EQUIP Series User Manual

Statistics: Received Bit Rate and Frame Rate

Document 800-05620 Rev C
04/10
Figure 4-10 Video Codec Settings
Statistics are received
for the current image in
real time when
Received is enabled.
3. Click Apply. Adjustments in your compression settings are captured in the statistics.
As you make adjustments, the Statistics field acts as a visual reminder of how your
settings affect the bit rate, frame rate, and bandwidth usage.
4. When you are satisfied with your settings—that is, that the image quality and
bandwidth usage meets your requirements—click Apply to save your settings.
Settings are not saved unless you click Apply.
To view in real time the received bit rate and frame rate statistics of the current image:
1. Click the Compression Settings tab.
2. In the Statistics area, select the Received check box. (See
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
HD4 EQUIP Series IP Dome Cameras User Guide
Set the Resolution for
NTSC or PAL video signals.
Figure 4-10.)
55