User Profiles; Logging On And Off The Ip Web Client; Launching The Web Client From Ip Utility; Table 4-1 User Roles And Privileges - Honeywell HD54IP User Manual

IP Camera Web Client

User Profiles

Logging On and Off the IP Web Client

Launching the Web Client from IP Utility

46
Table 4-1 describes the roles and privileges for the web-client application users:
Table 4-1 User Roles and Privileges
User Role
Administrator
Guest Operator
There are two ways to open each IP web client.
• By clicking Launch Browser from the IP Utility interface.
• Directly from Internet Explorer by entering the URL (the IP address) in the address
bar.
1. From the desktop, double-click the Honeywell IP Utility icon (
-OR-
Click Start All Programs  Honeywell Video Systems  IP Utility Honeywell
IP Utility.
The Honeywell IP Utility Log On window opens.
2. From the User Name drop-down list, select Administrator or Guest.
See Table 4-1 on page 46
3. In the Password field, enter the case-sensitive password.
The default Administrator password is 1234.
•
• The default Guest password is guest.
4. Click ( ).
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
-OR-
Select the device and click Connect (
The network settings for the connected device are displayed in the System pane.
Privileges
• View video and network settings
• Configure the alarm and audio settings
• Set up the video compression settings
• Configure auto exposure and white balance for the
camera
• Set up camera sabotage and video motion detection
settings
• View video
for User roles and privileges.
).
).