Table of Contents
Advertisement
Document 800-05620 Rev C
04/10
2.
Click the VMD drop-down arrow, and select Enable.
Squares that define the regions appear in their default positions on the live view video.
Figure 4-15
Video Analytics: Defining a Region
Region-defining box
3.
Click Apply.
Configuring a VMD Region
1.
Click and drag the box to resize and place it over the area you want to monitor on the
camera image.
2.
Select the sensitivity level (High, Medium, Low).
3.
Click Apply.
Note
To disable a zone, click the VMD drop-down menu, then select Disable.
HD4 EQUIP Series IP Dome Cameras User Guide
63
Advertisement
Table of Contents
