Navigating The User Interface; Figure 4-3 Web-Client Window Layout: Administrator Log On; Table 4-2 Tabs In The Web-Client Application - Honeywell HD4 EQUIP Series User Manual

Navigating the User Interface

The URL corresponds to the IP Address as
configured in the IP Utility.
If logged on as a Guest, only the Live
View tab is available. Administrators
can access all tabs.
The image from the camera
displays on every tab.
Document 800-05620 Rev C
04/10
Figure 4-3 Web-Client Window Layout: Administrator Log On
Click the tabs to access the available
configurations and settings.
Each tab has a section for configuration
and/or navigation controls.
The Web-Client application user interface consists of multiple user-friendly windows
organized by function. Access to the windows is user-controlled.
Table 4-2 Tabs in the Web-Client Application
Tab Enables you to...
Live View View video.
Device Information View the network settings and firmware details of the camera.
Compression Configure the compression.
Settings
Set the maximum bit rate and/or target bit rate (based on
priority mode settings) that the camera will provide across the
network. This value is the threshold that you do not want the
bit rate to exceed.
View received bit rate and frame rate statistics of the current
image in real time.
Camera Setup Configure auto exposure and white balance for the camera.
Video Analytics Configure the camera sabotage detection settings and how
video displays.
Alarm and Audio Configure the alarm and audio settings.
HD4 EQUIP Series IP Dome Cameras User Guide
Click Logout to exit the program.
Go here to confirm the user type
logged on.
49