Camera Setting - Avermedia XR8032 User Manual

3.2

Camera Setting

In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit
without saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras,
enable the ALL check box. To select more than one camera, Right click on the camera
icon. To select one camera only, Left click on the camera icon. The camera icon turns red
when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera,
we suggest disabling it so that the system won't detect it as video loss error.
(3) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden
you can still record the video and preview it in playback mode.
- Name
Change the camera name.
- Description
Add a short comment.
(4) IP Setting
Configure the camera for monitoring. Click IP setting to enter configuration interface. Click
OK to save the setting and to cancel the setting click Cancel.
Protocol: select the brand of camera. Drag down the list and select the brand of
-
camera. User also can click Search Device to find the selected protocol of camera on
the LAN network.
Model: After selected the protocol of camera, the available model will be list in drag
-
down list. If user is not sure the camera is which model, click Detect Model to find the
correct model of camera. Choosing the wrong model, user is not able to continue the
camera setup.
Channel: assign a channel of video server.
-
IP Camera Site: Enter the IP address and connecting port of the camera. Through the
-
IP address and connecting port, the DVR system can reach and monitor the camera.
URL: Besides the IP address, user can enter the URL of the camera, too.
-
(10)
(12)
24
(8)
(9)
(11)
(13)