Table of Contents
Advertisement
sensor is triggered.
5.
Click OK to exit and save the setting and Cancel to exit without saving the setting.
3.9.6
To Setup Alarm Recording Setting:
1.
Beside the Start Recording check box, click
Detail.
2.
In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable All to select all cameras.
3.
In the Frame Rate selection, select As
Setting to record the number of frames based
on the Recording Setting or Max to record the
maximum of frames based on the available
speed.
4.
In the Stop Recording after text box, set the
number in second for the program to continue recording after the alarm has ended.
5.
Click OK to accept the new settings and Cancel to exit without saving.
3.9.7
To Setup SMS/MMS Setting:
To use this feature, GSM/GPRS modem is required.
Connect the GSM/GPRS modem to the serial COMM
port of PC. Beside the SMS/MMS check box, click
Detail.
Select the port number in Com Port drop down list from
where the GSM/GPRS modem is connected.
1.
Click Modem Setup button to automatically detect
the Modem Baud Rate.
2.
In Local Phone Number text box, enter the GSM
SIM card phone number.
3.
In Phone Num text box, enter the contact number.
4.
You may now set to send thru SMS &/or MMS. If
you enable SMS setting, just enter the message in
the text box. If you enable MMS, enter the APN
name, WAP IP, MMS address and the message. If
you are not sure, please contact your mobile
service provider.
5.
Attach image when sensor is triggered select the camera that the images will be
capture and send when the sensor is triggered.
6.
Click OK to accept the new settings and Cancel to exit without saving.
Make sure your ISP provider and cell phone provider both support JPG file format
i
transmitting.
3.9.8
To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting
dialog box, select the PTZ camera number then select the Enable check box. Select the
position of the PTZ camera when the alarm is activated and ended. For the PTZ camera
ended point, user also can select one preset position or Auto Pan between preset position
group.
46
Advertisement
Table of Contents
