Basic Faxing; To Fax Using The Auto Document Feeder - Konica Minolta FAX2900 User Manual

5.3 Basic Faxing

5.3 Basic Faxing

To fax using the Auto Document Feeder

1
Press the [Fax] key.
The machine enters Fax mode,
and the fax screen appears.
2
Load the document to be faxed
into the Auto Document Feeder.
H Adjust the Document Guide
Plates to fit the size of the
document.
H
Load the document face up.
3
If necessary, change the "Resolution" setting (p. 5-12).
4
Using the 10-Key Pad, enter the
fax number of the recipient.
H The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing"
on page 5-2.
5
Press the [Start] key to begin scanning and sending the fax.
H To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 7-74).
Fax
5
5-13