Basic Faxing; To Fax Using The Automatic Document Feeder - Konica Minolta bizhub 160f User Manual

Faxing
5.3

Basic Faxing

To fax using the automatic document feeder

1
Press the [Fax] key to enter fax
mode.
2
Load the document face up into the
automatic document feeder.
3
Adjust the document guide plates to
fit the size of the document.
4
If necessary, change the resolution
setting (p. 5-14).
5
Using the 10-key pad, enter the fax
number of the recipient.
– The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing" on page 5-3.
6
Press the [Start] key to begin scanning and sending the fax.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 7-76).
? Do you want to stop the transmission?
% To stop the transmission, press the [Stop] key.
? Do you want to cancel a scanned document queued for transmis-
sion or a fax waiting to be redialed?
% Select
bizhub 160f
CANCEL RESERV. from the "FUNCTION" menu (p. 6-21).
5
5-15