CyberData 930274L Operation Manual page 34

DNS Server 1*
DNS Server 2*
Current Network Settings
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the V2 Speaker if appropriate.
4. Connect the V2 Speaker to the target network.
5. From a system on the same network as the V2 Speaker, open a browser with the new IP address
of the V2 Speaker.
Operations Guide
Table 2-7. Network Configuration Parameters (continued)
Web Page Item
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Shows the current network settings.
Shows the current Static IP address.
Shows the current Subnet Mask address.
Shows the current Default Gateway address.
Shows the current DNS Server 1 address.
Shows the current DNS Server 2 address.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930274L
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Description
CyberData Corporation
27