CyberData 930274L Operation Manual page 50

Table 2-12
Clock Status
Clock Firmware
NTP Settings
NTP Server
Posix Time Zone String
Time Server Offset
Set Time with External NTP Server on boot
Periodically update with time server
Time update period (in hours)
Set time from NTP Server
Clock Settings
Clock Brightness (0-14)
Use Ambient Light Sensor
Clock Colon Type
Clock Time Format
Current Time
Current Time in 24 hour format (HHMMSS)
Set Clock
Operations Guide
shows the web page items on the NTP Server and Clock Configuration page.
Table 2-12. NTP Server and Clock Configuration
Web Page Item
930274L
Configure the Speaker Parameters
Description
Displays the current clock status.
Displays the current clock firmware version.
Allows you to select the NTP server (64 character limit).
See Section 2.3.9.1, "Time Zone Strings"
(43 character limit).
Allows you to select the time server offset.
When selected, the time is set with an external NTP
server when the speaker restarts.
When selected, the time is periodically updated with a
time server.
Allows you to select the time updated period (in hours)
(4 character limit).
Allows you to set the time from the NTP server.
Allows you to select the clock brightness level (0-14)
(2 character limit)
Enables or disables the ambient light sensor.
Allows you to select the clock colon type (Off, On, or
Blink)
Allows you to select the clock format (12 or 24 hour)
Allows you to input the current time in the 24 hour format.
(6 character limit)
Click on this button to set the clock after entering the
current time.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Installing the VoIP V2 Speaker
CyberData Corporation
43