CyberData 930274L Operation Manual page 45

On the Audio Configuration page, enter values for the parameters indicated in
Note
Audio Files
0-9
Dot
Audiotest
Pagetone
Your IP Address is
Rebooting
Restoring default
Ringback Tone
Ring Tone
Night Ring
Operations Guide
Each entry on the Audio Configuration page replaces one of the stock audio files on the
board. When the input box displays the word default, the V2 Speaker is using the stock
audio file. If that file is replaced with a user file, it will display the uploaded filename.
Table 2-11. Audio Configuration Parameters
Web Page Item
The name of the audio configuration option is the same as the spoken
audio that plays on the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test
message..." (24 character limit)
Corresponds to a simple tone that is unused by default (24 character limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character limit).
This is the ringback tone that plays when calling a remote extension
(24 character limit).
This is the tone that plays when set to ring when receiving a call
(24 character limit).
Specifies the ringtone for nightring. By default this parameter uses the
same audio file that is selected for the Ring Tone parameter.
The Browse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the
stock audio file.
930274L
Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Table
Description
CyberData Corporation
38
2-11.