Installing The Remote Control Devices - TOHATSU MFS 20C Owner's Manual

16
INSTALLATION

2. Installing the remote control devices

It is recommended that you consult with
1 your authorized dealer for installation
and adjustment of the remote control
device.
2
Installation of the Remote Control
Cables (Box side) :
3
Follow the instruction manual
provided with the remote control.
4
Installation of the Remote Control
on your boat :
Follow the instruction manual
5
provided with the remote control.
Installation of the Remote Control
6
Cable (engine side) and the Cord
Assembly (Wiring Harness) :
7
Fitting of connecting parts to
cables
8
Screw the tip of the remote control
cable into the cable joint up to
9
approx. 10 mm (0.39 inch), then lock
them with a lock nut. Apply grease to
the hole of the cable joint.
10
Remote control cable
11
12
13
14
Lock nut
Cable joint
Approx. 10mm
(0.39 inch)
Fitting of Remote Control Cable to
Engine.
Note
Put the control lever in the Neutral
position and the Free Accel lever in
the fully closed position.
�������
!
Be careful not to loop the remote
control cables to a diameter of 406 mm
(16 inches) or less.
Cable
Harness B
Shift Cable
Throttle Cable
Drag Link