Stopping - TOHATSU MFS 20C Owner's Manual

Tohatsu outboards
Hide thumbs Also See for MFS 20C:
Table of Contents

Advertisement

4. Stopping

MF, EF, EFT type
Stop Switch
Stop switch
Lock
Turn the throttle grip to the slow
position.
Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed if it has been running
at full speed.
Push the stop switch to stop the
engine or release the stop switch
lock.
�������
!
Do not shift into Reverse during
planning, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering system
and/or shifting mechanism may be
damaged.
ENGINE OPERATION
EP, EPT type
OFF
Stop switch lock
(N)
Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has
been running at full speed.
Turn the main switch key to the
OFF position.
Notes
After stopping the engine, close the
air vent screw on the tank cap.
Disconnect the fuel connector of
the engine or the fuel tank.
Disconnect the battery cord of the EF
or EP type engine, if the engine will
not be used for more than 3 days.
31
ON
START
10
11
12
13
1
2
3
4
5
6
7
8
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents