Break-In - TOHATSU MFS 20C Owner's Manual

2. Break-in

Your new outboard motor and lower
unit require break-in for the moving
c o m p o n e n t s a c c o r d i n g t o t h e
conditions described in the following
time table.
1-10min
Throttle Position Idle
Speed
Note
Proper break-in allows outboard
motor to deliver it full performance for
longer service life.
Operating the outboard motor without
break-in can shorten service life of the
product.
If any abnormality is experienced
during the break-in;
10min-2hrs 2-3hrs
Less than 1/2 Less than 3/4
throttle throttle
Full throttle run
Approx.
allowed for 1 min
3,000 rpm max
every 10 min
Do not operate the outboard motor
in closed area or area with no forced
ventilation.
Exhaust gas emitted by this outboard
motor contains carbon monoxide that
will cause death if inhaled continuously.
Inhaling the gas initially causes
symptoms such as feeling of sickness,
drowsiness and headache.
During operation of the outboard motor:
PRE-OPERATING PREPARATIONS
�������
!
Discontinue the operation
immediately.
Have the dealer check the product
and take proper action(s) if
necessary.
3-10hrs
3/4 throttle
Approx.
4,000 rpm.
Full throttle run
allowed for 2 min
every 10 min
������
!
Keep peripheral area well ventilated.
Always attempt to stay on the
windward side of emission.
21
1
2
3
4
5
After 10hrs
6
Full throttle
available
7
8
9
10
11
12
13