Features; Status Leds - Allied Telesis AT-FS713FC/xx Installation Manual

Features

q
LEDs for unit and port status
q
Auto MDI/MDI-X for the twisted pair ports
q
Half- or full-duplex operation on the fiber optic port
q
Auto-negotiation of the duplex mode on the twisted pair ports
q
RJ-45 twisted pair connectors
q
FJ, LC, MT, SC, ST, or VF fiber optic connector
q
Store and forward Ethernet packet handling
q
MAC address table with a capacity of 4,000 addresses

Status LEDs

Table 3 defines the LEDs on the AT-FS713FC/xx and AT-FS717FC/xx Series
Switches.
LED Color
PWR Green
FD Green
OFF
100M Green
OFF
LNK/ACT Green
Blinking Green
OFF
4
Table 3 LEDs
Description
The switch is receiving power.
The fiber optic port is operating in full-duplex mode.
The fiber optic port is operating in half-duplex mode.
The twisted pair port is operating at 100 Mbps.
The twisted pair port is operating at 10 Mbps.
The port has established a valid link with the end-node
connected to the port.
Activity is detected on the port.
The port has not established a link with the end-node.