View Bmc System Event Log - Supero SuperServer 6026TT-H6RF User Manual

SUPERSERVER SYS-6026TT-H6RF/H6IBXRF/H6IBQRF User's Manual


View BMC System Event Log

This feature displays the BMC System Event Log (SEL). It shows the total num-
ber of entries of BMC System Events. To view an event, select an Entry Number
and pressing <Enter> to display the information as shown in the screen.
•
Total Number of Entries
•
SEL Entry Number
•
SEL Record ID
•
SEL Record Type
•
Timestamp
•
Generator ID
•
Event Message Format User
•
Event Sensor Type
•
Event Sensor Number,

Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as
shown in the following graphics.
•
Channel Number
command. This is initially set to [1]. Press "+" or "-" on your keyboard to
change the Channel Number.
•
Channel Number Status
Channel Number selected above: "Channel Number is OK" or "Wrong
Channel Number".

IP Address Confi guration
Enter the IP address for this machine. This should be in decimal and in dotted
quad form (i.e., 192.168.10.253). The value of each three-digit number separated
by dots should not exceed 255 as shown in the screen below.
Parameter Selector
Use this feature to select the parameter of your IP Address confi guration.
- Enter the channel number for the SET LAN Confi g
- This feature returns the channel status for the
7-20