Acpi Configuration; Ipmi Configuration; View Bmc System Event Log; Set Lan Configuration - Supero 4042G-72RF4 User Manual

A+ SERVER 4042G-72RF4 USER'S MANUAL
 ACPI Configuration
ACPI Aware O/S
Use this setting to enable or disable ACPI support for the operating system if it
supports ACPI. Options include Yes (enable ACPI support) or No (disable ACPI
support).
ACPI Version Features
Use this setting the determine which ACPI version to use. Options are ACPI
v1.0, ACPI v2.0 and ACPI v3.0.
ACPI APIC Support
Determines whether to include the ACPI APIC table pointer in the RSDT pointer
list. The available options are Enabled and Disabled.
Headless Mode
Use this setting to enable or disable headless operation mode through ACPI.
WHEA Support
Use this setting to enable or disable Windows Hardware Error Architecture.
NUMA Support
This setting Enables or Disables the building of an ACPI SRAT Table.
 IPMI Configuration
This menu shows static information about the IPMI firmware revision and status
of the BMC, as well as options for IPMI configuration.
 View BMC System Event Log
Pressing the Enter key will open the following settings. Use the "+" and "-" keys
to navigate through the system event log.
Clear BMC System Event Log
Selecting this and pressing the Enter key will clear the BMC system event log.
 Set LAN Configuration
Use the "+" and "-" keys to choose the desired channel number. This displays
Channel Number and Channel Number Status information.
7-14