5-10 Onboard Indicators - Supero SuperServer 6026TT-H6RF User Manual

LAN1/LAN2 Enable/Disable
Change the setting of jumper JPL1/JPL2
to enable or disable the LAN1 and LAN2
ports respectively. See the table on the right
for jumper settings. The default setting is
enabled.
VGA Enable/Disable
JPG1 allows you to enable or disable the
VGA port. The default position is on pins 1
and 2 to enable VGA. See the table on the
right for jumper settings.

5-10 Onboard Indicators

LAN1/LAN2 LEDs
The Ethernet ports (located beside the COM
port) have two LEDs. On each Gb LAN port,
one LED indicates activity when blinking
while the other LED may be green, amber or
off to indicate the speed of the connection.
See the table on the right for the functions
associated with the connection speed LED.
Infi niBand LED Indicators (LEB1/LEB2)
Two InfiniBand LEDs (LEB1/LEB2) are
included on the motherboard. The green LED
(LEB1) is the Infi niBand Link LED. The yellow
LED (LEB2) indicates activity. Refer to the
tables on the right for details.
Chapter 5: Advanced Serverboard Setup
LAN1/2 Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
VGA Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
LAN1/LAN2 LEDs
(Connection Speed
LED Color
Off
Green
Amber
Infi niBand Link LED
Color
Green
Off
Infi niBand Activity LED
Color
Yellow
Yellow
Off
5-19
Defi nition
Enabled
Disabled
Defi nition
Enabled
Disabled
Indicator)
Defi nition
No connection or
10 Mb/s
100 Mb/s
1 Gb/s
(LEB1)
Status Defi nition
Solid Infi niBand
Connected
Off No connection
(LEB2)
Status Defi nition
Solid Infi niBand: Active
Dim Infi niBand:
Connected,
Activity: Idle
Off No connection