Table of Contents
Advertisement
This chapter covers the steps required to install the X8DTT-HEF+/HIBXF+/HIBQF+
serverboard into the SC827HQ-R1400B chassis, connect the data and power
cables and install add-on cards. All serverboard jumpers and connections are also
described. A layout and quick reference chart are included in this chapter for your
reference. Remember to completely close the chassis when you have fi nished
working with the serverboard to better cool and protect the system.
5-1
Handling the Serverboard
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage
to any printed circuit boards (PCBs), it is important to handle them very carefully
(see previous chapter). To prevent the X8DTT-HEF+/HIBXF+/HIBQF+serverboard
from bending, keep one hand under the center of the board to support it when
handling. The following measures are generally suffi cient to protect your equipment
from electric static discharge.
Precautions
•
Use a grounded wrist strap designed to prevent Electrostatic Discharge
(ESD).
•
Touch a grounded metal object before removing any board from its antistatic
bag.
•
Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the serverboard, add-on cards and peripherals back into their antistatic
bags when not in use.
•
For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the serverboard.
Chapter 5
Advanced Serverboard Setup
Chapter 5: Advanced Serverboard Setup
5-1
Advertisement
Table of Contents
