Table of Contents
Advertisement
After all hardware components have been installed, you must fi rst confi gure Intel
South Bridge RAID Settings before you install the Windows OS and other software
drivers. To confi gure RAID settings, please refer to RAID Confi guration User Guides
posted on our web site at www.supermicro.com/support/manuals.
B-1 Installing Windows for a RAID System
1.
Insert Microsoft's Windows XP/2003 Setup CD in the CD drive and the
system will start booting up from CD.
2.
Press the <F6> key when the message "Press F6 if you need to install a third
party SCSI or RAID driver" displays.
3.
When the Windows XP/2003 Setup screen appears, press "S" to specify
additional device(s).
4.
Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH10R" into
the fl oppy drive and press the <Enter> key.
5.
Choose the Intel(R) ICH10R
the XP/2003 Setup Screen, and press the <Enter> key.
6.
Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all
devices are specifi ed, press the <Enter> key to continue with the installation.
7.
From the Windows XP/2003 Setup screen, press the <Enter> key. The
XP/2003 Setup will automatically load all device fi les and then, continue the
Windows XP/2003 installation.
8.
After the Windows XP/2003 OS Installation is completed, the system will
automatically reboot.
Appendix B
Installing Windows
SATA RAID Controller from the list indicated in
B-1
Appendix B: Installing Windows
Advertisement
Table of Contents
