Table of Contents
Advertisement
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue the boot-up procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
A-1 BIOS Error Beep Codes
BIOS Error Beep Codes
Beep Code
Error Message
Description
1 beep
Refresh
Circuits have been reset. (Ready to
power up)
5 short beeps + 1 long beep
Memory error
No memory detected in the system
8 beeps
Display memory read/
Video adapter missing or with faulty
write error
memory
1 continuous beep (with the
System Overheat
1 continuous beep with the front panel
front panel OH LED on)
OH LED on
A-1
Advertisement
Table of Contents
