Supero SuperServer 6026TT-H6RF User Manual page 52

SUPERSERVER SYS-6026TT-H6RF/H6IBXRF/H6IBQRF User's Manual
Ethernet Ports
Two Ethernet ports are located next to
USB0/1 on the IO Backplane. In addition,
an IPMI Dedicated LAN is located above
USB0/1. These ports accept RJ45 type
cables. See the table on the right for pin
defi nitions.
Note 1: Please refer to the LED Indicator
Section for LAN LED information.
Infi niBand Connection
(X8DTT-HIBXF+/HIBQF+ Only)
The onboard Infi niBand connector is located
on the backplane on the motherboard. This
switch is primarily used for High-performance
computing. See the table on the right for pin
defi nitions.
System Reset
If System Reset (JRST1) is connected to
a switch, then the system reset feature is
enabled. See the table on the right for pin
defi nitions.
Pin# Defi nition
1 P2V5SB
2 TD0+
3 TD0-
4 TD1+
5 TD1-
6 TD2+
7 TD2-
8 TD3+
9 TD3-
(NC: No Connection)
Pin # Defi nition
S1 Input
Pair0:Pos
S2 Input
Pair0:Neg
S3 Input
Pair1:Pos
S4 Input
Pair1:Neg
S5 Input
Pair2:Pos
S6 Input
Pair2:Neg
S7 Input
Pair3:Pos
S8 Input
Pair3:Neg
Infi niBand Ground Pins
(G1~G9) Pin Defi nitions
Pin#
G1~G9
Pin#
Pin 1
Pin 2
5-16
LAN Ports
Pin Defi nitions
Pin# Defi nition
10 SGND
11 Act LED
12 P3V3SB
13 Link 100 LED
(Yellow, +3V3SB)
14 Link 1000 LED
(Yellow, +3V3SB)
15 Ground
16 Ground
17 Ground
88 Ground
Infi niBand
Pin Defi nitions
Pin # Defi nition
S9 Output
Pair3:Pos
S10 Output
Pair3:Neg
S11 Output
Pair2:Pos
S12 Output
Pair2:Neg
S13 Output
Pair1:Pos
S14 Output
Pair1:Neg
S15 Output
Pair0:Pos
S16 Output
Pair0:Neg
Defi nitions
Ground
Alarm Reset
Pin Defi nitions
Defi nition
3.3V
Ground