Acpi Configuration; Ipmi Configuration; View Bmc System Event Log - Supero 1042G-TF User Manual

A+ SERVER 1042G-TF User's Manual
A display also showing the speeds of FAN1 Speed ~ FAN11 Speed is shown
on this page.
 ACPI Configuration
ACPI Aware O/S
Use this setting to enable or disable ACPI support for the operating system if
it supports ACPI. Options include Yes (enable ACPI support) or No (disable
ACPI support).
ACPI Version Features
Use this setting the determine which ACPI version to use. Options are ACPI
v1.0, ACPI v2.0 and ACPI v3.0.
ACPI APIC Support
Determines whether to include the ACPI APIC table pointer in the RSDT
pointer list. The available options are Enabled and Disabled.
Headless Mode
Use this setting to enable or disable headless operation mode through ACPI.
WHEA Support
Use this setting to enable or disable Windows Hardware Error Architecture.
 IPMI Configuration
This menu shows static information about the IPMI firmware revision and status of
the BMC, as well as options for IPMI configuration.
 View BMC System Event Log
Pressing the Enter key will open the following settings. Use the "+" and "-" keys
to navigate through the system event log.
7-12