Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach — press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove — press the centre
of the belt clip firmly with your
right thumb, push the finger-
nail of your left index finger up
between the clip and the hous-
ing and pull the clip in an
upward direction.
Charging the battery
The correct charge status can only be displayed if the battery is first
fully charged and discharged.
¤ Place the handset in the base with its display facing forward for
7.5 hours.
Please note
The handset must only be placed in the designated E500/E500A
base or the corresponding charger.
7.5hr
First steps
19