Plug-In Voice Edit; Storing/Saving The Created Voice - Yamaha MOTIF ES Owner's Manual

Plug-in Voice Edit

The Plug-in Voices (available when installing optional Plug-in Boards to the instrument) can be edited in basically the same way
as in Normal Voice Edit (page 79). Unlike with Normal voices, the Plug-in voices only have one Element for editing. In addition,
some of the other parameters may not be available. Refer to page 205 in the Reference section.

Storing/Saving the created Voice

Two steps are necessary in order to store (save) your voice – storing the edited voice to internal memory and saving the stored
voices to a SmartMedia/USB storage device.
User Normal Voice 001
User Normal Voice 002
User Normal Voice 003
STORE
User Normal Voice Bank 1
Storing
edited Voices
User Normal Voice 128
User Normal Voice 128
individually
Keep in mind that edited Voice data is stored to internal User memory (Flash ROM) and is stored even when turning the power
off. As such it is not necessary to save the data to SmartMedia card or another device; however, you may want to save it to
another media for backup or organizational purposes, using the Save operation. For more information, see page 86.
Storing the edited Voice as a User Voice
to internal memory
[VOICE] [STORE]
After editing the Voice, press the [STORE] button
1
to enter the Voice Store mode.
Make sure to execute the Store operation before selecting
another Voice.
2
Select the destination Voice memory.
Select a User Bank ("USR1" or "USR2" when storing a Normal
Voice, "UDR" when storing a Drum Voice, "P1-U" ~ "P3-U"
when storing a Plug-in Voice) and the desired Voice number
by using the data dial, [INC/YES] and [DEC/NO] button.
Select a User Bank.
Select a Voice number.
Internal memory (Flash ROM)
User Drum Voice 001
User Drum Voice 002
User Drum Voice 003
User Drum Voice Bank
User Plug-in Voice Bank 1
User Drum Voice 32
When you execute the Store operation, the settings for the destination
memory will be overwritten. Important data should always be backed up to
a separate SmartMedia/USB storage device.
3
The display prompts you for confirmation.
To cancel the Store operation, press the [DEC/NO] button.
User Plug-in Voice 001
User Plug-in Voice 001
User Plug-in Voice 002
User Plug-in Voice 001
User Plug-in Voice 002
User Plug-in Voice 003
User Plug-in Voice 002
User Plug-in Voice 003
User Plug-in Voice 003
All the User
User Plug-in Voice 064
Voice data in
User Plug-in Voice 064
User Plug-in Voice 064
internal
memory can
be saved as
a single file.
CAUTION
Press the [ENTER] button.
DEC/NO
EXIT
Editing a Voice
SmartMedia
SAVE
USB storage
device
File extension: W7A
File extension: W7V
File extension: W7E
The W7E file can be loaded to the
Voice Editor, computer software.
INC / YES
ENTER
EXECUTE
Owner's Manual
85