Yamaha MOTIF ES Owner's Manual page 54

Naming
Basic naming operation
As shown below, you can set the name by repeating the two operations – moving the cursor to the desired location by using the
Cursor button and selecting a character by using the data dial, [INC/YES] button, and [DEC/NO] button.
Moving the cursor to the desired location on the name
Using the character list
If you find it difficult to select the desired characters with the above method, you may want to use the following method —
selecting the characters from a list.
Move the cursor to the desired location.
INFORMATION
54
Owner's Manual
DEC/NO INC / YES
EXIT ENTER
EXECUTE
INFORMATION
Perform the operations below while holding the [INFORMATION] button.
DEC/NO INC / YES
EXIT ENTER
EXECUTE
Selecting a character at the cursor location
DEC/NO INC / YES
When the cursor is located at the Name, this [LIST]
icon appears and you can call up the Character List
display by holding the [INFORMATION] button.
Release the [INFORMATION] button to return back
to the original display.
Select a character for the cursor location on the name.
INFORMATION
DEC/NO INC / YES