Yamaha MOTIF ES Owner's Manual page 139

Using Zones effectively with external
The two examples below show how to use the Zones with both the internal tone generator and a connected external tone
generator. These instructions correspond to step #6 on the previous page.
n
Though all four Zones are used in the example below, you can use any number of Zones (two, three, or four). The settings are made with the MIDISwitch
parameter ([MASTER] [EDIT]
[F1] TRANS TGSwitch).
n
In these examples, the Zones are assigned to different areas of the keyboard. However, two or more Zones can also be assigned to the same area in a
layer, from the NOTE display ([MASTER]
Master settings with the Voice mode/Performance mode (Single-timbre tone generator mode)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit MIDI Transmit
Channel 1 Channel 2
Internal tone generator (Single Timbre)
[UTILITY] [F5] MIDI
Master settings with the Song mode/Pattern mode (Multi-timbral tone generator mode)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit MIDI Transmit
Channel 1 Channel 2
Part 05 Part 13
Receive Receive
Channel 1 Channel 2
Internal tone generator (Multi-timbral)
[SONG] [MIXING] [EDIT]
[F1]VOICE [SF2]MODE ReceiveCh
Zone selection [F1] TRANS
[EDIT] Zone selection
MIDI Transmit MIDI Transmit
Channel 3 Channel 4
[SF1] CH BasicRcvCh = 01
MIDI Transmit MIDI Transmit
Channel 3 Channel 4
Part selection
MIDISwitch) and the TGSwitch parameter ([MASTER]
[F2] NOTE).
Corresponds to step #6 on the previous page
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
[MASTER] [EDIT] Zone selection
Determine the MIDI Transmit Channel for each zone.
[MASTER] [EDIT] Zone selection
Determine the note range of each zone.
[MASTER] [EDIT] Zone selection
[MASTER] [EDIT] Zone selection
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER] [EDIT] Zone selection
Corresponds to step #6 on the previous page
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
[MASTER] [EDIT] Zone selection
Determine the MIDI Transmit Channel for each zone.
[MASTER] [EDIT] Zone selection
Determine the note range of each zone.
[MASTER] [EDIT] Zone selection
[MASTER] [EDIT] Zone selection
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER] [EDIT] Zone selection
Using as a Master Keyboard
[EDIT] Zone selection
[F1] TRANS MIDISwitch
[F1] TRANS TransCh
[F2] NOTE NoteLimitH
[F2] NOTE NoteLimitL
[F1] TRANS TGSwitch
[F1] TRANS MIDISwitch
[F1] TRANS TransCh
[F2] NOTE NoteLimitH
[F2] NOTE NoteLimitL
[F1] TRANS TGSwitch
Owner's Manual
139