Yamaha MOTIF ES Owner's Manual page 215

[SF1] OUTPUT
Volume
Pan
RevSend
ChoSend
DryLevel
n
For details about Effect connection in the Performance mode, see page 179.
Mono/Stereo
OutputSel (Output Select)
[SF2] INS TYPE (Insertion Type)
InsEF Connect
(Insertion Effect Connection)
InsA Ctgry (Insertion A Category)
InsA Type (Insertion A Type)
InsB Ctgry (Insertion B Category)
InsB Type (Insertion B Type)
n
Insertion effects can be applied only to the A/D Part, among the Audio Input Parts.
[F6] EFFECT
This menu gives you comprehensive control over the effects. For details about the Effect connections in the Performance mode, see page 179.
[SF1] CONNECT (Connection)
EF PART PLG-EF
(Plug-in Insertion Effect)
Chorus Ctg (Category),
Chorus Type
Chorus Return (Level)
Chorus Pan
Chorus to Reverb
Reverb Type
Reverb Return
Reverb Pan
Determines the output level of the Audio Input Part.
Settings: 0 ~ 127
Determines the stereo pan position of the Audio Input Part.
Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
Determines the Send level of the Audio Input Part signal sent to the Reverb effect.
Settings: 0 ~ 127
Determines the Send level of the Audio Input Part signal sent to the Chorus effect.
Settings: 0 ~ 127
Determines the level of the Audio Input Part which has not been processed with the System Effects (Reverb,
Chorus).
Settings: 0 ~ 127
Determines the signal configuration for the Audio Input Part, or how the signal or signals are routed (stereo or mono).
Settings: stereo, L mono, R mono, L+R mono
stereo............... Both the L and R channels of the audio input are used.
L (left) mono .... Only the L channel of the audio input is used.
R (right) mono . Only the R channel of the audio input is used.
L+R mono........ The L and R channels of the audio input are mixed and processed in mono.
Determines the output jack assignment for the Audio Input Part.
Settings: See page 31.
This display is available only when the AD (A/D Part) is set to on from the [F6] EFFECT
type and connection of the Insertion Effect applied to the A/D Part can be set from this display.
Same as in the CONNECT display in the Voice Edit mode ([VOICE]
CONNECT). Please note that the InsEF Connect cannot be set to "parallel" here.
Determines the Part to which the Insertion effect is applied. This parameter is available only when a special Effect
Plug-in board (PLG100-VH) has been installed.
Settings: Part 1~4, PartP2~P3, AD, off
Determines the Chorus effect type.
Settings: Refer to the Effect Types list in the separate Data List booklet.
Determines the Return level of the Chorus Effect.
Settings: 0 ~ 127
Determines the pan position of the Chorus effect sound.
Settings: L63 (far left) ~ C (center) ~ R63 (far right)
Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.
Settings: 0 ~ 127
Determines the Reverb effect type.
Settings: Refer to the Effect Types list in the separate Data List booklet.
Determines the Return level of the Reverb Effect.
Settings: 0 ~ 127
Determines the pan position of the Reverb effect sound.
Settings: L63 (far left) ~ C (center) ~ R63 (far right)
Performance Edit mode Common Edit
[SF2] INS SW display. The
[EDIT] [COMMON] [F6] EFFECT
Owner's Manual
[SF1]
215