Yamaha MOTIF ES Owner's Manual page 278

Display Messages
LCD Indication
No response from USB device
No sample data.
Not empty folder
Now checking plug-in board.
Now loading... (xxxx)
Now saving... (xxxx)
Now scanning auto loaded files
Now working...
Overwrite? [YES]/[NO]
Pattern length mismatch.
Phrase length mismatch
Phrase number overflow
Please keep power on.
Please stop sequencer.
PLG100 not supported.
Plug-in1 communication error.
Plug-in1 type mismatch.
Plug-in2 communication error.
Plug-in2 type mismatch.
Plug-in3 communication error.
Plug-in3 type mismatch.
Power on mode stored
Receiving MIDI bulk
Sample freq is too low.
Sample is protected.
Sample is too long.
Sample is too short.
Sample memory full.
Scene & Arpeggio type stored
Seq memory full.
System memory crashed.
This performance uses user voices.
Too many favorites
Too many fixed notes
Too many samples.
Transmitting MIDI bulk
USB connection terminated. Press
[ENTER].
USB device connecting
USB power consumption exceeded.
USB transmission error
Utility stored
278
Owner's Manual
There is no response from the USB device connected to the USB TO DEVICE terminal.
This message appears when a sample-related Job cannot be executed because the specified sample is not available.
You have attempted to delete a folder that contains data.
The MOTIF ES is checking the Plug-in board installation status during power-on.
Indicates that a file is being loaded.
Indicates that a file is being saved.
Scanning for the files specified for Auto Load.
Executing the memory arangement after finishing Sampling or cancelling the Load/Save operation by pressing the
[EXIT] button.
A save operation will overwrite data on the SmartMedia/USB storage device, and this message confirms whether it is OK
to continue or not. Press [INC/YES] or [DEC/NO] as required.
A Pattern Job will result in the length of a Pattern being greater than 256 measures.
A Pattern Job will result in the length of a phrase being greater than 256 measures.
The maximum number of phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
The data is being written to Flash ROM.
Never attempt to turn off the power while data is being written to Flash ROM. Turning the power off while this message is
shown results in loss of all user data and may cause the system to freeze (due to corruption of data in the Flash ROM).
This may also result in the MOTIF ES being unable to properly start up the next time the power is turned on.
The operation you've attempted to execute cannot be done during Song/Pattern playback.
The Plug-in All Bulk Save function does not apply to the PLG100 series boards.
The Plug-in board that has been installed to slot 1 does not work.
The User Voice created by using the Plug-in board previously installed to slot 1 (but now removed from the slot) has been
selected.
The Plug-in board that has been installed to slot 2 does not work.
The User Voice created by using the Plug-in board previously installed to slot 2 (but now removed from the slot) has been
selected.
The Plug-in board that has been installed to slot 3 does not work.
The User Voice created by using the Plug-in board previously installed to slot 3 (but now removed from the slot) has been
selected.
The setting of the program number automatically selected when turning the power on has been stored.
The MOTIF is receiving MIDI bulk data.
The sampling frequency is too low and the Frequency Convert Job cannot be executed.
The sample cannot be overwritten because it is protected.
The sample size is too large and the Time Stretch Job cannot be executed.
The sample length is too short and the Frequency Convert Job cannot be executed.
The sample memory is full and further sampling operations, Jobs, or load operations cannot be executed.
The Song Scene and current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job
execution, MIDI reception/transmission, or loading from the SmartMedia/USB storage device). Try again after erasing
unwanted Song, Pattern, or User phrase data.
Writing data to Flash ROM has failed.
The performance you have loaded includes User voice data. Check whether the voice you saved exists at the
appropriate User voice bank.
You've attempted to assign more than 257 voices to the Favorite category.
When converting the song or pattern data to the Arpeggio data, the amount of different notes in the data to be converted
has exceeded sixteen.
The maximum overall number of samples (8192) has been exceeded.
The MOTIF ES is transmitting MIDI bulk data.
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
Recognizing the USB storage device connected to the USB TO DEVICE terminal.
The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the regulated
value.
An error occurs when communicating with the USB storage device.
The settings in the Utility mode have been stored.
Explanation