Yamaha MOTIF ES Owner's Manual page 93

3
Select the file type to be loaded.
The file saved in operation explained on the previous page contains all the Performances.
If you wish to load all the Performances, set Type to "All." In this case, all data that can be created on the MOTIF ES will be
loaded in step #5 below. If you wish to load only a specific Performance, set Type to "Performance."
SmartMedia/USB storage device
CAUTION
When Type (file type) is set to "All" and the Load operation is executed, all data that can be created on the instrument will be loaded. This means that any
existing data in User memory will automatically be overwritten and lost. Make sure to save any important data to a SmartMedia/USB storage device before
performing the Load operations, especially when Type is set to "All."
n
When Type (file type) is set to "Performance" and the Load operation is executed, the sound of the Performances may not be reproduced properly if the
User Voices assigned to the Performances saved in the file have been changed by editing.
4
Select a file ( ) to be loaded.
Move the cursor to the file (extension: W7A) saved in the operation explained on the previous page. If you set the Type
parameter to "All" in step #3, go to step #5. If you set the Type parameter to "Performance" in step #3, execute the operations in
the following box, then go to step #5.
When Type is set to "Performance":
When Type is set to "Performance," you can specify and load a specific Performance from a file (with the extension W7A).
Move the cursor to the file (extension:
W7A) saved in the operation
explained on the previous page.
CAUTION
Loading data to this synthesizer automatically erases and replaces any existing data in the User memory. Make sure to save any important data to a
SmartMedia/USB storage device before performing any Load operations.
5
Press the [ENTER] button to execute the Load operation.
After the data has been loaded, a "Completed" message appears and operation returns to the original display.
CAUTION
While the data is being saved, make sure to follow these precautions:
• Never remove or eject the media from the device (SmartMedia or USB storage).
• Never unplug or disconnect any of the devices.
• Never turn off the power of the MOTIF ES or the relevant devices.
Loading a specific
Performance when Type
Performance 001
is set to "Performance."
Performance 002
Performance 003
All Performances are
Performance 128
loaded when Type is set
to "All."
File extension: W7A
Performance
ENTER
All the Performances contained in
the selected file are listed on the
display. Move the cursor to the
EXECUTE
desired Performance.
Editing a Performance
Internal Memory
(Flash ROM)
Performance 001
Performance 002
Performance 003
Performance 128
Performance
ENTER
Select the desired
Performance to be loaded.
EXECUTE
Select the destination Performance number.
93
Owner's Manual