Yamaha MOTIF ES Owner's Manual page 138

Using as a Master Keyboard
2
Press the [F2] MEMORY button to call up the Mode setting display.
After setting the Mode and Program number which you wish to memorize to the Master, set the Zone Switch
3
to "on".
Determine the mode that is called
up when the Master number is
selected.
4
Press the [EDIT] button to enter the Master Edit mode.
5
Call up the Common Edit display or Zone Edit display.
Use Zone Edit to edit the parameters for each Zone. Use Common Edit to edit the parameters for all of the Zones.
While in the Master Edit mode, you can switch
between the Common Edit display and the Zone
Edit display as shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit
display.
6
Select the menu you wish to edit by pressing the [F1] - [F6] and [SF1] - [SF5] buttons, then edit the parameters.
See the next page for details and some setting examples.
7
Name the edited Master.
Input a name in the [EDIT]
For detailed instructions on naming, refer to page 53 in the Basic Operation section.
8
Store the edited Master to internal User memory.
For details, refer to steps #5 - 6 on page 137.
138
Owner's Manual
Determine the Program number that is called up when the Master is selected.
DRUM KITS
FAVORITES
COMMON
Common Edit
[COMMON] [F1] NAME display.
Set the Zone Switch to "on."
EDIT JOB STORE
COMPARE SCENE STORE
SET LOCATE
PRE 5 PRE 6 USER 1 USER 2
A. PIANO KEYBOARD GUITAR/
GUITAR
PLUCKED
A B C D
SYN LEAD SYN PAD/ SYN COMP CHROMATIC
PERCUSSION
CHOIR
1 2 3 4
ELEMENT/PERF. PART/ZONE
9 10 11 12
Zone 1 Edit
Zone 2 Edit
Zone 3 Edit
Zone 4 Edit
Calling up the Zone Edit display
Press the desired Zone number from the ZONE
[1] - [4] buttons to call up the Zone Edit display.
Indicates the display for editing Zone 1.