Yamaha MOTIF ES Owner's Manual page 128

Creating a Song on the MOTIF ES
3
Press the [EDIT] button to enter the Song Mixing Edit mode.
4
Call up the Common Edit display or Part Edit display.
Use Part Edit to edit the parameters for each Part. Use Common Edit to edit the parameters for all of the Parts.
While in the Song Mixing Edit mode, you can switch
between the Common Edit display and the Element
Edit display as shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit
display.
n
You can mute or solo a Part just as is done with
tracks in the Song Play mode or Pattern Play mode.
n
Select the menu you wish to edit by pressing the [F1] - [F5] buttons and [SF1] - [SF5] buttons, then edit the
5
parameters in each display.
For details on the available parameters, see page 234.
6
Repeat steps #4 - 5 as desired.
7
Store the edited Song Mixing settings to internal User memory (DRAM).
After pressing the [EXIT] button to return to the Song Mixing mode, press the [STORE] button to enter the Song Mixing Store
mode, then press the [ENTER] button to execute the Store operation (page 131).
Before turning the power off, save the stored Song Mixing settings to a SmartMedia/USB storage device as
8
Song data in the File mode (page 132).
128
Owner's Manual
DRUM KITS
FAVORITES
COMMON
Common Edit
Common Edit operations cannot be
performed on the Multi-part Plug-in parts
17 - 32. The Mixing settings for the Muti-
Part Plug-in Part (17~32) apply not to one
individual song but to all 64 songs.
EDIT JOB STORE
COMPARE SCENE STORE
SET LOCATE
Calling up the Part Edit display
PRE 5 PRE 6 USER 1 USER 2
Press the desired Part number from the PART [1] -
[16] buttons to call up the Part Edit display.
A. PIANO KEYBOARD GUITAR/ GUITAR
PLUCKED
A B C D
SYN COMP CHROMATIC
SYN LEAD SYN PAD/
CHOIR PERCUSSION
1 2 3 8
......
ELEMENT/PERF. PART/ZONE
9 10 11 16
......
Indicates the display for editing Part 1.
To switch between the Part 1 - 16
display, Part 17 - 32, and Part PLG1
- 3 display, press the [F6] button.
Part1 Edit
Part2 Edit
Part3 Edit
Internal Tone
Part4 Edit
Generator
Part 16 Edit
Part 17 Edit
Multi-Part Plug-in
Board PLG100-XG
Part 32 Edit
Plug-in part 1 (PLG1) Edit
Plug-in part 2 (PLG2) Edit
Plug-in part 3 (PLG3) Edit
F 6
Single Part
Plug-in
Board